openhab hyperion rules

cat boblight.rules

var HSBType hsbValue  
 var String red  
 var String green  
 var String blue  
 var String hexValue

rule “lsBoblight”  
 when  
 Item lsBoblight received command  
 then  
 {  
 Boblight.sendCommand(switch receivedCommand {  
 case 0 : “0,100,1”  
 case 1 : “0,0,100”  
 case 2 : “0,100,100”  
 case 3 : “60,100,100”  
 case 4 : “120,100,100”  
 case 5 : “120,100,50”  
 case 6 : “180,100,100”  
 case 7 : “240,100,100”  
 case 8 : “300,100,100”  
 case 9 : “0,0,0”  
 default : “0,100,1”  
 })  
 }  
 end

rule “Boblight”  
 when  
 Item Boblight changed  
 then  
 executeCommandLine(‘/usr/bin/hyperion-remote@@–clearall’)  
 hsbValue = Boblight.state as HSBType  
 red = Integer::toHexString(hsbValue.red.intValue)  
 green = Integer::toHexString(hsbValue.green.intValue)  
 blue = Integer::toHexString(hsbValue.blue.intValue)  
 hexValue = (“00″+red).substring(red.length()) + (“00″+green).substring(green.length()) + (“00″+blue).substring(blue.length());  
 if (hexValue.equals(“010000”)) {  
 executeCommandLine(‘/usr/bin/hyperion-remote@@-c@@000000’)  
 lsBoblight.sendCommand(0)  
 } else if (!hexValue.equals(“000000”)) {  
 executeCommandLine(‘/usr/bin/hyperion-remote@@-c@@’ + hexValue)  
 } else {  
 lsBoblight.sendCommand(9)  
 }  
 end